-
Audio
-
Amplifiers
Pre-amplifiers
Transistors
Balanced I/O
Power Management
Dynamics Processors
Special Function
-
-
Industrial
-
Power Management
Discrete Semiconductors
Op-amps and Comparators
IIoT Memory
Sensor Technology
Alarms and Monitoring
-
-
Partners
- Why Profusion?
- News
- Contact
-
Store
- Alternate parts in the family(Compare): THAT72XX
- Moisture sensitivity level: 3
- RoHS 3(EU 2015/863)
-
Pack sizes & weights (for bulk orders) TUBE 48 0.010kg
Newly Released
THAT7210M10-U Clock Cleaner
Sku:
THAT7210M10-U
Features
- Extremely low jitter clocking for high performance digital audio systems
- Baseband jitter: < 25ps RMS
- Jitter attenuation: > 60dB (>100Hz)
- Compatible Mode with CS2100 and CS2501
- Pin and register compatible
- Enhanced JetPLL performance
- Native JetPLL Mode
- Register access to all JetPLL parameters
- Generates MCLK and Frame Sync
- Phase-aligned to the reference
- Repeatable latency
- AES11-compliant
- Continuous Base Rate frequency range 30k to 50kHz
- Fast lock time: less than 1 second
- I2C/SPI Control interface
- PLL lock and other signals assignable to pins
The THAT 7210 is an audio clock cleaner with patented Jitter Elimination Technology - JetPLL. The JetPLL generates a low-jitter master clock (MCLK) from a jittery input word clock (WCLK) and enables high-performance ADCs and DACs to reach their full performance potential. It is intended for clock cleaning only and has no frequency generator.
The part is designed to be program-compatible with the registers for the Cirrus CS 2100 insofar as pro audio applications are concerned. The THAT 7210 delivers base band jitter below 25 ps and wide band jitter below 100 ps. In Compatibility Mode the register set is that of a CS 2100 and in Native Mode registers are a subset of the 7200, since there is no frequency generator here.
Introduction to THAT7200 Series
Baseband Jitter | 25 ps |
---|---|
Jitter Attenuation | 60 dB |
Clock Frequency Range | 6-50 MHz |
Supply Voltage (min) | 3V |
Supply Voltage (max) | 3.6V |
Supply Current | - |
Applications
UK Customers
Orders below £100.00 can be delivered by 1st Class Post at a rate of £3.50 (allow 3-5 working days) or a next working day tracked courier at a rate of £9.00.
Orders above £100.00 are delivered by a next working day tracked courier at a rate of £9.00.
All prices shown exclude VAT.